Magister Thesis
Permanent URI for this collection
Browse
Browsing Magister Thesis by Title
Now showing 1 - 20 of 27
Results Per Page
Sort Options
Item Open Access Contribution à l'étude de la Synthèse biogénique des nanoparticules de ZnO à partir de plante de Camellia Sminensis et ses applications pharmacologiques(Université Mohamed Boudiaf - M’Sila, 2024-07) Djaidja Saadia Mechegueg Loubna Enc/ Dr. Ghania BENAICHELe développement des nanotechnologies verte sa suscité l'intérêt des chercheurs pour la biosynthèse écologique des nanoparticules. Dans cette étude, la synthèse biogénique de nanoparticules d'oxyde de zinc stables a été réalisée à l'aide d'extraits de la plante Camellia Sinensis. Ces nanoparticules biosynthétique sont été caractérisées à l'aide d'un spectrophotomètre UV−vis , la diffraction des rayons X (DRX).La stabilité des nanoparticules d'oxyde de zinc bio-réduites a été analysée à l'aide de spectres d'absorption UV-vis .Il a été observé que l'extrait de Camellia Sinensis peut réduire les ions zinc dans les nanoparticules d'oxyde de zinc , la diffraction des rayons X (DRX) a également confirmé que la synthèse des NPs d'oxyde de zinc est due au plan cristallin de la phase cristalline ZnO. Par conséquent, cette méthode peut être utilisée pour la biosynthèse rapide et écologique de nanoparticules d'oxyde de zinc stables de taille 26- 38 nm. D'autre part, les effets antioxydants des formes d'extrait et de nanoparticules sont été évalués par la méthode : test 2,2-diphényl-1-picryl hydrazyl (DPPH) .Les résultats de l'activité antioxydante ont révélé que les nanoparticules d'oxyde de zinc ont une réduction et un piégeage importants des radicaux libres.Item Open Access CONTRIBUTION A L’ETUDE DU SEL DOUBLE (NH4)2ZnCl4 COMME MATERIAU D’ELECTRODE NEGATIVE POUR GENERATEURS ELECTROCHIMIQUES « TOUT-SOLIDES »(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2003-11-11) GHANEM, AKILALe sel double (NH 4)2 ZnCl 4 a été préparé et caractérisé par les techniques suivantes : FTIR, DRX et ATG-ATD. L’électrode composite Zn + (NH 4)2 ZnCl 4 a été réalisée pour générateurs électrochimiques « tout solide » à électrolyte conducteur protonique (H-Mte) associée à une cathode en MnO 2. Les générateurs préparés par cette anode montrent des caractéristiques appréciables. L’analyse par DRX du produit de décharge de l’anode compléter par l’étude électrochimique, nous a incité à proposer une réaction anodique mettant en jeu 8e- par mole de sel double.Item Open Access Contribution to the study of soil pollution by heavy metals(Université Mohamed Boudiaf - M’Sila, 2024-07) Sahar Merrouche Enc/ Dr. Kamel NoufelLa pollution des sols par les métaux lourds est un problème environnemental omniprésent, qui présente des risques importants pour la santé humaine et les écosystèmes. Les métaux lourds peuvent persister dans le sol pendant des siècles, se bioaccumuler dans la chaîne alimentaire et contaminer les sources d'eau. Les activités anthropiques telles que l'exploitation minière, les processus industriels et l'élimination inappropriée des déchets sont les principales sources de contamination des sols par ces métaux. Cette étude se concentre sur l'application d'un agent chélateur, l'acide éthylènediaminetétraacétique (EDTA), dans le lavage des sols pendant différentes périodes de temps, en tant que technique de remédiation. L'efficacité de l'EDTA dans l'élimination des métaux lourds des sols contaminés est évaluée par des expériences en laboratoire. Les résultats de cette recherche fournissent des informations précieuses aux scientifiques de l'environnement, aux praticiens de l'assainissement des sols et aux décideurs politiques qui travaillent à la restauration des sols contaminés, sur le potentiel du lavage des sols avec des agents chélateurs en tant que méthode viable pour réduire la contamination par les métaux lourds dans les sols, avec des conditions optimales identifiées pour une élimination maximale des métaux lourds tout en minimisant les risques environnementaux, contribuant ainsi à la préservation de la qualité de l'écosystème.Item Open Access Contrôle de qualité physicochimique et microbiologique de l’acide folique(comprimé OPTIFOLATES® 5mg)(2024-07) DERRAR Abir LAKHAL Chaima. Pro/Dr Ghanai BEN AICHEL'objectif de cette étude était de suivre le contrôle de qualité physicochimique etmicrobiologique du médicament anti-anémique(OPTIFOLATES® 5mg) sous forme de comprimés, fabriqué dans les laboratoires OPTIPHARM (Guedjel, Sétif). L'étude visait à vérifier la qualité des matières premières (principe actif) utilisées et du produit fini. Pour ce faire, différentes méthodes décrites en pharmacopée japonaise ont été utilisées pour prouver que le médicament répondait aux normes requises. Les principaux critères évalués étaient : les analyses physico-chimiques permettant de déterminer la dose du principe actif et du produit fini par spectroscopie UV-visible, ainsi que les tests pharmacotechniques (dureté, friabilité, masse moyenne), quant aux analyses microbiologiques (absence de bactéries pathogènes et Escherichia coli). L’ensemble de ces analyses a montré la conformité du médicament aux spécifications pharmaceutiques japonaises. Par conséquent, ce médicament est considéré comme de bonne qualité pharmaceutique et peut être mis sur le marché.Item Open Access Dépollution d’un effluent de laiterie par électrocoagulation en réacteur agité(Université Mohamed Boudiaf - M’Sila, 2024-07) BEN CHABANE Sara BEN HAMIDA ChaimaCette étude porte sur le traitement des eaux usées laitières à l'aide d'un processus électrochimique. Pour ce faire, une nouvelle conception a été proposée, combinant les processus d'électrocoagulation et d'électroflottation. Dans un tel procédé, l'électrocoagulation joue le rôle principal dans la déstabilisation et l'agrégation des particules fines, tandis que l'électroflottation est responsable de la flottation des flocs formés dans l'effluent de l'unité d'électrocoagulation. L'influence de la densité de courant, du temps de traitement, du pH initial de l'effluent et de la conductivité sur les performances du procédé a été évaluée en mesurant l'efficacité d'élimination la turbidité et des matières en suspension (MES). Les résultats obtenus dans cette étude suggèrent que cette combinaison est un procédé fiable pour le traitement des effluents laitiers et qu'elle permet d'obtenir une élimination de 89 % de la turbidité et de 92 % des MES à 26,3 mA/cm2 pendant 60 minutes.Item Open Access Elaboration et Caractérisation d’une électrode modifiée (Silicium/poly(pyrrole fonctionnalisé)-cuivre)(2009) KHANICHE, BRAHIMCe travail consiste à l'élaboration de nouveaux matériaux d'électrodes composites par la complaxation et l’electrorduction de cuivre dans un film de poly (pyrrole acide benzoïque).Le dépôt du film de polymère à la surface de l’électrode de silicium est obtenu par oxydation électrochimique du monomère en milieu organique. L’incorporation des particules de cuivre dans le film de polymère est réalisée par trempage de l’électrode modifiée dans une solution de sulfate de cuivre pour complexer les ions cuivriques, suivis d’une éléctroréduction dans une solution aqueuse pour précipiter le cuivre sous forme des particules métallique dans le film de polymère.Item Open Access Elaboration, caractérisation de charbons actifs fonctionnalisés et étude de leurs propriétés en adsorption de composés organiques.(Université de m'sila, 2013-10-13) Naziha, LADJALActivated carbon were prepared by thermochemical activation at 450 °C of the shell of apricot stone for varions ratios of impregnation of phosphoric acid : 30, 60, 90, 120,150 and 180 % by mass. These coals were characterized, for their surface chemistry, by infra-red spectroscopy (FTIR) analysis, selective neutralization « Boehm titration », measurements of the point of zero charge (pHPZC), and for their porous structure, by nitrogen adsorption at 77 K, methylene bleu adsorption and iodine index test. Activated carbons prepared from shell of apricot stone of slightly acid surfaces (pHPZC ~ 6) were compared with a commercial activated carbon (Sigma Aldrich) (SBET ~ 732 m2.g-1) of basic surface (pHPZC ~ 9,4) for their properties of adsorption of the methylene bleu, of iodine and an anionic dye « Red Nylosan N-2RBL ». Alow ratio of impregnation (XP ≤ 30 %) leads to microporous activated carbon with few mesopores and low specific surface area (SBET ~ 880 m2.g-1), while a high ratio (XP > 30%) produces essentially mesoporous active carbon with a specific surface area reaching 1975 m2.g-1 and a porous volume of 1,37 cm3.g-1 for an exclusively mesoporous CAP180, corresponds of the loss of mass activation ~ 67%. The adsorption experiments were carried out according to the pH of medium between 2 and 12, the contact time and the concentration of azo (anionic) dye « Red Nylosan N-2RBL ». A law of seccond order is well adapted to simulate the kinetics of dye adsorption on activated carbon. The adsorpion isotherms of the dye « Red Nylosan N-2RBL » were studied at a temperature 20 °C. The langmuir model, a typical monolager adsorption, which reproduces the best experimental adsorption isotherms. The different adsorption capacities of activated carbons fallow the fallowing order : CAP180 > CAP150 > CAP120 > CAC > CAP90 > CAP60 > CAP30 indicating that the azo (anionic) dye « Red Nylosan N-2RBL » preferably adsorbed in the mesopores which are accessible to this molecule. The adsorption capacity of the activated carbons (CAP30 and CAP60) and CAC is very sensitive to the pH variation and the transition in the mode of adsorption, due to electrostatic interactions observed at pHS corresponding to the changes of ionic species of the molecule of dye (pH = pKai of the dye) and also depending on the polarity of the surface sites of the activated carbon (pH < pHPZC) the surface of activated carbon is positively charged and (pH > pHPZC) the surface of activated carbon is negatively charged.Item Open Access Electropolymérisation et caractérisation de nouveaux polymères sur substrat transparent (FTO) pour usage dans les cellules photovoltaiques organiques.(Université de m'sila, 2014-06-26) Haffar, HichemCe travail se rapporte à l’électrodéposition de trois polymères qui sont poly Bleu de Méthylène, poly Azure A et poly Toluidine Bleu sur deux substrats : platine et verre conducteur (FTO). Ces polymères se présentent sous formes de couches fines et adhérentes, avec des épaisseurs de l’ordre de centaines de nanomètres et une bonne conductivité électrique de l’ordre de 103 Scm-1. Les résultats de l’impédancemétrie nous ont permis de calculer les résistances de transfert de charge et les capacités des trois polymères, de tracer les droites de Mott-Schottky et d’estimer les potentiels des bandes plates. Comme ils nous informent sur la nature semiconductrice de ces derniers (type n). Les trois polymères présentent de faibles valeurs de gap aux alentours de 1.65 eV estimés à partir des niveaux énergétiques HOMO et LUMO. L’analyse des films par Uv-vis confirme le phénomène de polymérisation et montre la présence du contre ion de l’électrolyte (phénomène de dopage). Les tests photoélectro-chimiques, montrent l’aptitude des trois polymères à générer des photocourants très considérables lorsqu’ils sont soumis à une lumière monochromatique. Le poly Bleu de Méthylène présente le meilleur photocourant sous excitation d’une lumière d’énergie équivalente à celle du gap (730 nm).Item Open Access ETUDE COMPARATIVE DES COUCHES MINCES DE TiO2 PREDESTINEES A LA CONCEPTION DES CELLULES PHOTOVOLTAÏQUES OBTENUES PAR DIFFERENTES METHODES(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2009-10-22) RAHAL, FOUDILLe dioxyde de titane est un élément clé dans les cellules solaires à bases de colorants, il joue le rôle d’une photoanode. Dans cette étude nous avons procédé à son élaboration par voie électrochimique via la voltampérométrie cyclique et la chronampérométrie. Nos résultats ont aboutit à deux formes de dépôts : un gel amorphe et un film cristallin. Les différentes caractérisations micrographiques montrent le caractère poreux et la taille nanométrique aussi bien pour les films amorphes et les films cristallins qui sont plutôt compacts. L’analyse par DRX de ces derniers montre une structure principale correspondant à celle de l’anatase. L’analyse par UV-Visible montre une grande similarité de comportement spectroscopique entre les films recuits et non recuits : valeur de gap, de transmittance et d’absorbance. Par ailleurs l’étude électrochimique a permis de voir l’effet de la nature du milieu réactionnel sur les films et l’importance de l’hydratation sur leurs conductivités. Et sous irradiation par une source lumineuse UV dont l’énergie est supérieure à celle de la bande interdite du semiconducteur nous avons constaté une importante photoactivité de nos films sous leurs deux formes.Item Open Access Etude de l'évolution de la conductivité de la couche de corrosion obtenue sur différents alliages de plomb Pb-Sn et Pb-Sb(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2009) Zoulikha, BAKOURD'après les résultats exposés ci-dessus, nous pouvons en tiré les conclusions suivantes: 1- A partir des courbes de potentiel de circuit ouvert et les mesures de courant d'échange du couple Fe2+/Fe3+, nous constatons que la résistance de la couche de corrosion obtenue sur les alliages PbSn augmente avec la durée de polarisation due à la croissance de la couche de PbO sauf pour les alliages 2 et 5%Sn. 2- Pour les alliages PbSb, Sb n'a pas le même effet que l'étain. La couche obtenue pour chaque polarisation est constituée principalement d'oxyde de plomb intense qui ne se transforme pas complètement en PbSO4. 3- L'étain se trouve bénéfique pour l'augmentation de la conductivité de la couche de corrosion par rapport à l'antimoine et ceci en réduisant l'épaisseur de cette couche. 4- L'augmentation de la conductivité de la couche de corrosion est assurée par suite de formation d'oxydes conducteurs pour les alliages riches en étain.Item Open Access ETUDE DE LA NATURE DE LA LIAISON CHIMIQUE PAR L'INTERMEDIAIRE DE LA STRUCTURE DE BANDE DANS LES SEMICONDUCTEURS(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2004-07-08) Yousfi, SamiaDu fait de l'importance des semi-conducteurs dans la science et la technologie, un immense intérêt a été apporte à la connaissance de ces matériaux,notamment a l'étude de leurs propriétés électroniques et structurales, en particuliers celles des liaisons chimiques. Le but de ce travail est l'étude de la tendance chimique ainsi que les liaisons dans les semi-conducteurs cristallisant dans la phase diamant et zinc blende: IV-IV: Ge, Si III-V:GaAs, GaSb, InSb,InAs,AlAs,AlSb,InP, Gap, InN ,AlN II-VI: ZnS, ZnSe, MgS, MgSe Cela par le biais du calcul de la structure de bande qui est devenu un moyen pratique et judicieux pour l'interprétation et l'analyse d'un nombre considérable de propriétés. Cette étude a été appliquée en utilisant la Méthode dite de Pseudo potentiel Empirique local (E.P.M). La confrontation des résultats obtenus avec ceux disponibles dans les différentes littératures révèle une bonne concordance.Ce qui nous permet de conclure que la méthode adoptée dans cette étude est très valide dans la description des états électroniques des matériaux étudies dans le cadre de ce travail.Item Open Access Etude phytochimique et pouvoir biologique des métabolites secondaires de la plante Zizyphora hispanica L. de la région de M'SILA(Université de m'sila, 2013-03-21) MERATATE, FAIZAمن بين النباتات الطبية الموسمية النادرة التي تتميز برائحة قوية نبتة Zizyphora hispanica ، لقد قمنا بإجراء دراسة فيتو كيميائية لهذه النبتة،حيث قمنا باستخلاص اغلب موادها الفعالة بواسطة مذيبات مختلفة القطبية (الايثر البترولي، ثنائي كلور الميثان، البتانول. ولقد قمنا بعملية الفصل لمستخلص البتانول وذلك بواسطة كروماتوغرافيا العمود فتحصلنا على فلافانون وقد تم تحديد نسبة متعدد الفينولات في كل من مستخلص ثنائي كلور الميثان و مستخلص البتانول وهي على التوالي 9.18 مغ 144.9, مغ مكافئ حمض الغاليك لكل غ من النبتة وهي جافة. وقد تم كذلك تحديد نسبة الفلافونويدات في كل من مستخلص ثنائي كلور الميثان و مستخلص البتانول فكانت على التوالي 5 , 8 مغ مكافئ الكارستين لكل غ من النبتة وهي جافة. بالإضافة إلى المستخلصات الثلاث قمنا باستخلاص الزيوت الأساسية بواسطة جهاز كلافنجر، ثم قمنا بدراسة النشاطية المضادة للميكروبات و النشاطية المضادة للأكسدة لجميع المستخلصات ومقارنتها فيما بينها ومن ثمة مقارنتها بنشاطية الزيوت الأساسية.Item Open Access Extraction and GC/MS Analysis of major Alkaloids found in the Family of Fabaceae(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2007-07-04) BENAICHE, GhaniaPendantl’étudeparGC/MSdel’extraitméthanoliquedupartiesaériennesduplante Cytisus purgans (Famille de Fabaceae) du Flore Algérienne , douze (12) alcaloïdes lupiniques (de type Lupin) ont été identifiées, dont onze (11) sont de type Sparteine (Sparteine-type) et un (1) est un alcaloïde piperidinique ( Ammodendrine ) . Ainsi que, 13α-Hydroxylupanine a été isolé en utilisant la TLC préparative. L'étude de l'activité antimicrobienne a montré que Cytisus purgans a une activité antibactérienne contre toutes les souches bactériennes testées.Item Open Access Formulations à Base de Plantes Médicinales: Gels de Chia et de Lin(Université Mohamed Boudiaf - M’Sila, 2024-07) Tallab Chaima Abdelhafid MelakL’extraction du mucilage (gel) des graines des plantes médicinales chia et lin a été réalisée par la méthode de décoction. Après séparation des graines, les gels obtenus ont été soumis à une étude phytochimique et une formulation pour renforcer l’aspect de gel et le stabiliser par des agents gélifiants et la roselle. Les gels formulés ont présenté une apparence homogène, sans irritation cutanée, un effet émollient, mais qui doivent être conservés à froid pour éviter la contamination microbienne.Item Open Access LA CORRELATION ENTRE L'IONICITE ET LES FACTEURS DE FORME SYMETRIQUES ET ANTISYMETRIQUES DANS LES SEMICONDUCTEURS(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2004-07-08) BARKA, FATIHALe but de ce travail est d'étudier la variation des facteurs de forme symétriques Vs(3), Vs(8), Vs(11), et antisymétriques Va(3), Va(4), Va(11), des pseudopotentiels en fonction de l'ionicité dans les semiconducteurs suivants : IV: Ge, Si . III-V : AlSb, GaSb, AlAs, GaAs, InSb, AlN, InN, InP, InAs. II- VI : MgS, MgSe, ZnS, ZnSe. Dans cette étude, on a utilisé la méthode empirique des pseudopotentiels( E.P.M) afin de calculer la structure de bande électronique et par conséquent le facteur d'ionicité .Ce dernier a été calculé en utilisant le gap antisymétrique et l'énergie de cohésion . Nos calculs ont montré que le gap antisymétriques dans des résultats plus proches à ceux de littérature .Item Open Access LES POLYPHENOLS DE LA PROPOLIS ALGERIENNE(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2004-11-27) MOUDIR, Naima.Dans ce travail on a fait l’étude de l’un des produits de l’abeille qui est la propolis, dans le but de déterminer sa composition chimique, et de tester son effet antioxydant et scavenge des radicaux libres. On a fait la récolte de quatre échantillons de la propolis, de quatre régions de l’Algérie : Tlemcen, TiziOuzou, Guelma et M’sila. Après l’extraction hydrauéthanolique (70 %), on a analysé le résidu par la technique GC/MS. On a obtenu environ 90 composés dans les quatre échantillons, la plus part sont des polyphénols entre acides phénoliques et leurs esters et flavonoides. On a testé l’effet antioxydant de l’extrait éthanolique de la propolis sur les neutrophiles humains (PMNs), stimulés par fMLP et PMA. Les résultats obtenus ont montré que pour la stimulation par fMLP, la concentration de 1µg/ml de l’extrait de propolis des quatre échantillons a un grand effet antioxydant, pour la stimulation par PMA, la propolis n’a pas montré un effet considérable qu’a partir de 2,5 µg/ml . Cet effet est dû aux composés phénoliques contenus dans la propolis.Item Open Access L’application d’hydrogène vert sur les piles combustibles(Université Mohamed Boudiaf - M’Sila, 2024-07) Lamouri Bouchra. Kirouani LalahoumL'hydrogène vert est une solution prometteuse pour relever les défis environnementaux mondiaux et la nécessité de sources d'énergie renouvelables et durables. Il est produit par électrolyse de l'eau en utilisant des sources d'énergie renouvelable comme l'énergie solaire et éolienne, ce qui le rend exempt d'émissions de carbone. L'hydrogène vert a le potentiel de transformer le paysage énergétique mondial avec des applications variées. Dans le secteur des transports, il peut servir de carburant propre pour les véhicules électriques, les bus et les camions via des piles à combustible, contribuant ainsi à la réduction de la pollution et à l'amélioration de la qualité de l'air. Dans l'industrie, il peut être utilisé comme combustible et matière première, réduisant ainsi l'empreinte carbone des processus industriels. De plus, il offre des solutions pour le stockage de l'énergie renouvelable, atténuant les fluctuations de production des énergies solaire et éolienne. Malgré ses nombreux avantages, l'hydrogène vert fait face à des défis importants, notamment le coût élevé de production et les infrastructures nécessaires pour son stockage et transport. Néanmoins, avec des investissements croissants dans la recherche et le développement et les progrès technologiques, l'avenir de l'hydrogène vert semble prometteur. Par des politiques de soutien et des investissements stratégiques, l'hydrogène vert pourrait devenir un élément clé du mix énergétique mondial, aidant à atteindre les objectifs de durabilité environnementale et à réduire la dépendance aux combustibles fossiles.Item Open Access Préparation d’un matériau composite à base des fibres végétales (Cynodon)(2024-06) Mahdi Ihab Charif Abd elkarim. Rap/ Laib NouriItem Open Access Préparation et caractérisation d’un nanocomposite à base de polypropylène et d’une argile locale : la montmorillonite de Maghnia(UNIVERSITE MOHAMED BOUDIAF - M’SILA, 2009) MOHAMMEDI, NadiaLe travail que nous venons d’exposer dans ce présent mémoire avait pour objectif l’étude et la maitrise des paramètres qui influent sur la préparation des nanocomposites polypropylène/argile par extrusion réactive à l’état fondu. Pour aboutir à cette fin, nous avons travaillé sur les échantillons suivant : l’argile brute, la montmorillonite échangée au sodium MMT-Na et la montmorillonite échangée au tétrabutylchlorure ammonium MMT-CTBA. Nous avons incorporés un agent de couplage de type polypropylène greffé à l’anhydride maléique pour augmenter les interactions entre les différents composants. La montmorillonite algérienne provenant de Maghnia la MAGHNITE a une composition d’un minéral silico-aluminate avec présence de magnésium. Les nanocomposite sont préparés de deux manières : la voie directe en fondu et la voie par masterbatch. Les échantillons destinés aux propriétés mécaniques sont refroidis par recuit et par trempe. Ces nanocomposites sont caractérisés par spectroscopie à transformée de Fourier (IRTF) et par diffraction de rayons X (DRX). Les résultats de spectroscopie (IRTF) du greffage de l’anhydride maléique sur les chaines de PP montrent une nouvelle bande, celle du carbonyle de MAH sur les chaines de PP, alors que la modification de la montmorillonite échangée au sodium MMT-Na par le surfactant le chlorure tétrabutyl ammonium (CTBA) montre une nouvelle bande, celle de C—N et l’absence des C-H du CTBA sur Le spectre IRTF du composé MMT-Na, confirmant ainsi la réussite de nos réactionsItem Open Access Préparation et étude de nanocomposites C-LiFePO4 et son utilisation comme matériau d’électrode positive de générateurs électrochimiques(Université de m'sila, 2010) Sabrina, BAHACHEDes phases pures à base de LiFePO4 et de bonne cristallinité ont pu être obtenues par la voie sol-gel. La taille nanométrique des particules des produits de synthèse a été estimée par la relation de Scherrer et confirmé à l’aide de l’analyse par microscopie électronique à transmission. La présence d’environ 12% wt. de carbone résiduel sur la surface des nanocristaux de LiFePO4 améliore considérablement la conductivité électronique qui passe de 1.2 10-8 (synthèse par voie solide) à 2.7 10-3 S cm-1 soit une amélioration d’un facteur de l’ordre de 105. L’effet de la température de cristallisation a également été étudié. Pour des températures de cristallisation inférieure à 600°C l’obtention de LiFePO4 de structure olivine n’a pas pu être possible ainsi que la conductivité électrique du carbone résiduel obtenu dans ces conditions est très faible. Au-delà de 600°C, la conductivité électrique augmente avec la température de cristallisation et ceci malgré que le taux de carbone résiduel diminué. Ce résultat peut être expliqué par le fait que la qualité du carbone est meilleure (graphitisation). La substitution partielle sélective de 1% mol de Li+ par des cations de valence supérieure (B3+) nous a permis d’obtenir un matériau C-Li0.99B0.01FePO4 de conductivité électrique encore plus importante (σ = 5.7 10-3 S cm-1). Ce dernier matériau a été utilisé comme cathode dans la cellule C-Li0.99B0.01FePO4/LiClO4-C2H3N/FePO4. Il présente des performances électrochimiques prometteuses, en particulier, une résistance de transfert de charge relativement faible engendrant ainsi des courants cathodique et anodique assez élevés. Ces performances lui confèrent la possibilité d’un fonctionnement adéquat lors des cycles de décharges et recharges avec des régimes rapides. Les performances de cette électrode positive peuvent être améliorées si celle-ci est associée à une électrode négative à base de Li4Ti5O12 qui assure également un bon fonctionnement dans les mêmes conditions et avec des régimes de décharge-charge encore plus rapides.